How to Save Petrol While Riding a Bike

Saving fuel is an excellent way of helping the environment. Riding efficiently can help in avoiding the damage to the environment and ease your expenses as well. You can follow the recommendations to save more fuel every day:

• You must try driving at a steady speed. Driving at a steady speed not only saves fuel but it makes the vehicle more efficient. Driving at an unsteady speed puts more pressure on the engine and it decreases the fuel efficiency.

• You should make sure that your tire pressure is adjusted according to the type of road you drive in. Additionally, you should keep adjusting the drive chain tension accurately.

• You must ensure that your engine is always tuned and your vehicle is serviced frequently by an authorized garage.

• Make sure to renew your Pollution Under Control Certificate.

• You mustn't press the clutch too hard while riding the vehicle

• You shouldn't run the engine at low gear for a long time

• You shouldn't park your vehicle under the sun; it could lead to vaporization of fuel

• You shouldn't continually press the brake pedal while driving

• You shouldn't increase your engine rpm through traffic stops. You can turn down the engine if you need to wait for more than 30 seconds

• You shouldn't cover the front and sides of the engine since it could restrict the air flow to the engine fins which is needed for cooling down the engine.

How to Maintain Low Emission Levels?

• Keep the spark plug clean and maintain the space between electrodes properly.

• Always ensure that the air filter is clean.

• Get the carburetor adjusted at a workshop/repair shop.

• Don't fill engine oil more than needed and adhere to the replacement schedule. Make sure that you replace the engine oil on the designated date.

• Never use adulterated petrol.

• You must get the emission level checked after every three months at an authorized emission checking centers.

How Can You Increase Your Bike Mileage?

• Using a bike for daily commute saves a lot of time. Additionally, if you travel every day, you'd try to use your bike more efficiently.

• Maintaining your bike properly, taking care of the engine so that it consumes less fuel could be pretty easy. It is economical and ensures the safety of the rider on busy Indian roads.

• You can follow the tips described below for making your two-wheeler ride more safe and economical:

Proper Maintenance & Service

Maintenance the bike properly and timely servicing of the vehicle is of prime importance for keeping the performance of your two-wheeler at the optimum level. This could also result in enhancing the fuel efficiency of your vehicle since the gearbox and engine need lubrication for functioning effortlessly. Getting your bike serviced as prescribed in the maintenance book is advisable. Frequent engine oil change, optimizing the level of coolant oil and lubricating the chain, your vehicle can be optimized to perform at the highest efficiency.

Maintaining The Right Tyre Pressure

It is also pertinent to maintain the tire pressure at recommended levels for increasing the mileage of your bike. Usually, there are markings of the right tire pressure on the tires. If you plan on carrying an additional load on your vehicle, you can check the bike manufacturer’s handbook for precise guidance.

Avoid Keeping the Engine On Unnecessarily

Leaving the engine running while your bike is parked or not in use could lead to wastage of fuel. It is essential to turn off the ignition whenever the wait is longer than 10 seconds. These days every two-wheeler comes with a self-start button, and turning on the engine isn't a huge problem anymore.

Avoid Clutch Override

Excessive usage of clutch must be avoided. A large number of two-wheeler riders tend to over-ride the clutch, especially when it isn't in use. This practice could result in unnecessary fuel consumption. In a severe traffic situation, clutch over-riding could be avoided easily by using appropriate gears. This could also help you in increasing the elasticity of the clutch plate and also help you in saving a significant amount of money.

Sensible Gearing

For avoiding burning out the engine of your vehicle, you must change to higher gears swiftly. This could help in running your bike’s engine smoothly and it can also increase the mileage of your vehicle significantly. Also, it should be noted that constantly driving at high speed can also reduce fuel efficiency. Overspeeding will put more stress on your engine and it could lead to a reduction in fuel efficiency.

Use Good Quality Fuel

Using good-quality, more refined oil could add to the life of your engine and it can also provide higher fuel efficiency.

Avoid Traffic

It might sound absurd since riding in traffic cannot be avoided. But riding in heavy traffic leads to a lot of fuel wastage and the engine could also take a toll. First, if you travel daily to a location, you can try finding out the route which has the least traffic. Secondly, if you start early, you won't end up getting stuck in heavy traffic. Getting stuck in the traffic and turning the engine off and on again could negatively affect your vehicle’s fuel efficiency. Hence, it is best to avoid traffic as much as possible. You could also take the help of GPS or radio traffic status to learn the traffic conditions before leaving the house.

Refuel Your Vehicle in The Morning

The fuel is denser when the temperature is cold, so it's better to fill up your tank early morning or late at night. Oil expands with the rising temperature, thus reducing the amount of energy it can generate.

To conclude we can say that,

Fuel economy has been one of the biggest concerns among the bike owners in India mainly due to the rising fuel cost and the tips mentioned above can surely help you in using your vehicle efficiently.